11/2/2022 0 Comments Gateway bios quickboot![]() ![]() Push and release the platform Power button on the server front panel (see FIGURE 1-4). If you have a Sun Fire V40z server, use this step:Ī.This button provides power to the BIOS, operating system, and drivers. Push and release the platform Power button on the server front panel (see FIGURE 1-1). This switch provides AC power to the SP and basic hardware.ī. Turn on the AC Power switch on the server back panel (see FIGURE 1-2). If you have a Sun Fire V20z server, use these steps:Ī.Power on the server using one of the following two methods, depending on which server type you have: Severe damage to server components will occur if the server is operated without adequate cooling mechanisms.ġ.Ğnsure that an AC power cord is plugged into each power connector on the rear of the server and into an AC power outlet(s).Ģ. See Section 2.4, BIOS Setup Utility for more information.Ĭaution - Do not operate this server without all fans, component heat sinks, air baffles, and the cover installed. USB keyboard support is disabled in the BIOS by default. If you want to configure the server BIOS, you must use a PS/2 keyboard for initial bootup. ![]() GATEWAY BIOS QUICKBOOT HOW TOFor information about how to identify which version of the server you have, refer to Section 3.4, Releases of the Sun Fire V20z Serverand Section 4.4, Releases of the Sun Fire V40z Server. The updated release (chassis PN 380-1206) of the server does notship with the packaging insert in the PCI card slots. Do notremove the plastic air-baffle inserts from the PCI slots. You can discard these packaging inserts, which serve as protection during shipping. Note - Before powering on the server for the first time, follow the setup instructions in the Sun Fire V20z and Sun Fire V40z Servers-Installation Guide.Ĭaution - Before you power on a Sun Fire V40z server for the first time, you must remove the packaging inserts from the server’s PCI card slots and CPU card slot to ensure proper airflow and cooling. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |